ICeach Index

Position: Home > tech > LM339N QUAD DIFFERENTIAL COMPARATORS

LM339N QUAD DIFFERENTIAL COMPARATORS

Published:2011/5/10 9:46:00 |

SLCS006L − OCTOBER 1979 − REVISED JUNE 2004
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 1
Single Supply or Dual Supplies
Wide Range of Supply Voltage:
− Max Rating . . . 2 V to 36 V
− Tested to 30 V . . . Non-V Devices
− Tested to 32 V . . . V-Suffix Devices
Low Supply-Current Drain Independent of
Supply Voltage . . . 0.8 mA Typ
Low Input Bias Current . . . 25 nA Typ
Low Input Offset Current . . . 3 nA Typ
(LM139)
Low Input Offset Voltage . . . 2 mV Typ
Common-Mode Input Voltage Range
Includes Ground
Differential Input Voltage Range Equal to
Maximum-Rated Supply Voltage . . . ±36 V
Low Output Saturation Voltage
Output Compatible With TTL, MOS, and
CMOS
description/ordering information
These devices consist of four independent
voltage comparators that are designed to operate
from a single power supply over a wide range of
voltages. Operation from dual supplies also is
possible as long as the difference between the two
supplies is 2 V to 36 V, and VCC is at least 1.5 V
more positive than the input common-mode
voltage. Current drain is independent of the
supply voltage. The outputs can be connected to
other open-collector outputs to achieve
wired-AND relationships.
The LM139 and LM139A are characterized for operation over the full military temperature range of
−55°C to 125°C. The LM239 and LM239A are characterized for operation from −25°C to 125°C. The LM339
and LM339A are characterized for operation from 0°C to 70°C. The LM2901 is characterized for operation from
−40°C to 125°C.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
2004, Texas Instruments Incorporated
LM139, LM139A . . . D, J, OR W PACKAGE
LM239 . . . D, N, OR PW PACKAGE
LM239A . . . D PACKAGE
LM339, LM339A . . . D, DB, N, NS, OR PW PACKAGE
LM2901 . . . D, N, NS, OR PW PACKAGE
LM139, LM139A . . . FK PACKAGE
(TOP VIEW)
NC − No internal connection
SLCS006L − OCTOBER 1979 − REVISED JUNE 2004
2 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
description/ordering information (continued)
ORDERING INFORMATION
TA
VIOmax
AT 25°C MAX VCC PACKAGE† ORDERABLE
PART NUMBER
TOP-SIDE
MARKING
PDIP (N) Tube of 25 LM339N LM339N
SOIC (D)
Tube of 50 LM339D
LM339
Reel of 2500 LM339DR
5 mV 30 V SOP (NS) Reel of 2000 LM339NSR LM339
SSOP (DB) Reel of 2000 LM339DBR LM339
TSSOP (PW)
Tube of 90 LM339PW
L339
0°C to 70°C
Reel of 2000 LM339PWR
PDIP (N) Tube of 25 LM339AN LM339AN
SOIC (D)
Tube of 50 LM339AD
LM339A
Reel of 2500 LM339ADR
2 mV 30 V SOP (NS) Reel of 2000 LM339ANSR LM339A
SSOP (DB) Reel of 2000 LM339ADBR L339A
TSSOP (PW)
Tube of 90 LM339APW
L339A
Reel of 2000 LM339APWR
PDIP (N) Tube of 25 LM239N LM239N
SOIC (D)
Tube of 50 LM239D
LM239
5 mV 30 V
Reel of 2500 LM239DR
−25°C to 85°C
TSSOP (PW)
Tube of 90 LM239PW
L239
25 85 Reel of 2000 LM239PWR
2 mV 30 V SOIC (D)
Tube of 50 LM239AD
LM239A
Reel of 2500 LM239ADR
PDIP (N) Tube of 25 LM2901N LM2901N
SOIC (D)
Tube of 50 LM2901D
LM2901
7 mV 30 V
Reel of 2500 LM2901DR
SOP (NS) Reel of 2000 LM2901NSR LM2901
−40°C to 125°C TSSOP (PW)
Tube of 90 LM2901PW
L2901
Reel of 2000 LM2901PWR
7 mV 32 V
SOIC (D) Reel of 2500 LM2901VQDR L2901V
TSSOP (PW) Reel of 2000 LM2901VQPWR L2901V
2 mV 32 V
SOIC (D) Reel of 2500 LM2901AVQDR L2901AV
TSSOP (PW) Reel of 2000 LM2901AVQPWR L2901AV
† Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at
www.ti.com/sc/package.
SLCS006L − OCTOBER 1979 − REVISED JUNE 2004
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 3
description/ordering information (continued)
ORDERING INFORMATION
TA
VIOmax
AT 25°C MAX VCC PACKAGE† ORDERABLE
PART NUMBER
TOP-SIDE
MARKING
CFP (W) Tube of 25 LM139W LM139W
CDIP (J) Tube of 25 LM139J LM139J
5 mV 30 V LCCC (FK) Tube of 55 LM139FK LM139FK
SOIC (D)
Tube of 50 LM139D
LM139D
−55°C to 125°C
Reel of 2500 LM139DR
CFP (W) Tube of 25 LM139AW LM139AW
CDIP (J) Tube of 25 LM139AJ LM139AJ
2 mV 30 V LCCC (FK) Tube of 55 LM139AFK LM139AFK
SOIC (D)
Tube of 50 LM139AD
LM139AD
Reel of 2500 LM139ADR
† Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at
www.ti.com/sc/package.
symbol (each comparator)
OUT
IN−
IN+
schematic (each comparator)
80-μA
Current
Regulator
80 μA
GND
OUT
VCC
60 μA 10 μA
10 μA
IN+
IN−
All current values shown are nominal.
SLCS006L − OCTOBER 1979 − REVISED JUNE 2004
4 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)†
Supply voltage, VCC (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 V
Differential input voltage, VID (see Note 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±36 V
Input voltage range, VI (either input) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −0.3 V to 36 V
Output voltage, VO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 V
Output current, IO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 mA
Duration of output short circuit to ground (see Note 3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Unlimited
Package thermal impedance, θJA (see Notes 4 and 5): D package . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86°C/W
DB package . . . . . . . . . . . . . . . . . . . . . . . . . . . 96°C/W
N package . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80°C/W
NS package . . . . . . . . . . . . . . . . . . . . . . . . . . . 76°C/W
PW package . . . . . . . . . . . . . . . . . . . . . . . . . 113°C/W
Package thermal impedance, θJC (see Notes 6 and 7): FK package . . . . . . . . . . . . . . . . . . . . . . . . . 5.61°C/W
J package . . . . . . . . . . . . . . . . . . . . . . . . . 15.05°C/W
W package . . . . . . . . . . . . . . . . . . . . . . . . 14.65°C/W
Operating virtual junction temperature, TJ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150°C
Case temperature for 60 seconds: FK package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260°C
Lead temperature 1,6 mm (1/16 inch) from case for 60 seconds: J package . . . . . . . . . . . . . . . . . . . . . 300°C
Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −65°C to 150°C
† Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTES: 1. All voltage values, except differential voltages, are with respect to network ground.
2. Differential voltages are at IN+ with respect to IN−.
3. Short circuits from outputs to VCC can cause excessive heating and eventual destruction.
4. Maximum power dissipation is a function of TJ(max), θJA, and TA. The maximum allowable power dissipation at any allowable
ambient temperature is PD = (TJ(max) − TA)/θJA. Operating at the absolute maximum TJ of 150°C can affect reliability.
5. The package thermal impedance is calculated in accordance with JESD 51-7.
6. Maximum power dissipation is a function of TJ(max), θJC, and TC. The maximum allowable power dissipation at any allowable case
temperature is PD = (TJ(max) − TC)/θJC. Operating at the absolute maximum TJ of 150°C can affect reliability.
7. The package thermal impedance is calculated in accordance with MIL-STD-883.
SLCS006L − OCTOBER 1979 − REVISED JUNE 2004
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 5
electrical characteristics at specified free-air temperature, VCC = 5 V (unless otherwise noted)
PARAMETER TEST TA‡
LM139 LM139A
CONDITIONS† UNIT
MIN TYP MAX MIN TYP MAX
VIO Input offset voltage
VCC = 5 V to 30 V,
VIC = VICR(min),
25°C 2 5 1 2
mV
VO = 1.4 V Full range 9 4
IIO Input offset current VO = 1.4 V
25°C 3 25 3 25
nA
Full range 100 100
IIB Input bias current VO = 1.4 V
25°C −25 −100 −25 −100
nA
Full range −300 −300
VICR
Common-mode
25°C
0 to
VCC−1.5
0 to
VCC−1.5
V
input-voltage range
Full range
0 to
VCC−2
0 to
VCC−2
AVD
Large-signal
differential-voltage
amplification
VCC± = ±7.5 V,
VO = −5 V to 5 V
25°C 200 50 200 V/mV
IOH
High-level output
VID = 1 V
VOH = 5 V 25°C 0.1 0.1 nA
current VOH = 30 V Full range 1 1 μA
VOL
Low-level output
VID = −1 V, IOL = 4 mA
25°C 150 400 150 400
mV
voltage Full range 700 700
IOL
Low-level output
current
VID = −1 V, VOL = 1.5 V 25°C 6 16 6 16 mA
ICC
Supply current
(four comparators)
VO = 2.5 V, No load 25°C 0.8 2 0.8 2 mA
† All characteristics are measured with zero common-mode input voltage, unless otherwise specified.
‡ Full range (MIN to MAX) for LM139 and LM139A is −55°C to 125°C. All characteristics are measured with zero common-mode input voltage,
unless otherwise specified.
switching characteristics, VCC = 5 V, TA = 25°C
PARAMETER TEST CONDITIONS
LM139
LM139A UNIT
MIN TYP MAX
Response time
RL connected to 5 V through 5.1 kΩ,
§
100-mV input step with 5-mV overdrive 1.3
μs
CL = 15 pF, See Note 8 TTL-level input step 0.3
§ CL includes probe and jig capacitance.
NOTE 8: The response time specified is the interval between the input step function and the instant when the output crosses 1.4 V.
SLCS006L − OCTOBER 1979 − REVISED JUNE 2004
6 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
electrical characteristics at specified free-air temperature, VCC = 5 V (unless otherwise noted)
PARAMETER TEST CONDITIONS† LM239
LM339
LM239A
TA‡
LM339A UNIT
MIN TYP MAX MIN TYP MAX
VIO Input offset voltage
VCC = 5 V to 30 V,
VIC = VICR(min),
25°C 2 5 1 3
mV
VO = 1.4 V Full range 9 4
IIO Input offset current VO = 1.4 V
25°C 5 50 5 50
nA
Full range 150 150
IIB Input bias current VO = 1.4 V
25°C −25 −250 −25 −250
nA
Full range −400 −400
VICR
25°C
0 to
VCC−1.5
0 to
VCC−1.5
V
Common-mode
input-voltage range
Full range
0 to
VCC−2
0 to
VCC−2
AVD
Large-signal
differential-voltage
amplification
VCC = 15 V,
VO = 1.4 V to 11.4 V,
RL ≥ 15 kΩ to VCC
25°C 50 200 50 200 V/mV
IOH
High-level output
VID = 1 V
VOH = 5 V 25°C 0.1 50 0.1 50 nA
current VOH = 30 V Full range 1 1 μA
VOL
Low-level output
VID = −1 V, IOL = 4 mA
25°C 150 400 150 400
mV
voltage Full range 700 700
IOL
Low-level output
current
VID = −1 V, VOL = 1.5 V 25°C 6 16 6 16 mA
ICC
Supply current
VO = 2.5 V, No load 25°C 0.8 2 0.8 2 mA
(four comparators)
† All characteristics are measured with zero common-mode input voltage, unless otherwise specified.
‡ Full range (MIN to MAX) for LM239 and LM239A is −25°C to 85°C, for LM339 and LM339A is 0°C to 70°C. All characteristics are measured with
zero common-mode input voltage, unless otherwise specified.
switching characteristics, VCC = 5 V, TA = 25°C
PARAMETER TEST CONDITIONS
LM239, LM239A,
LM339, LM339A UNIT
MIN TYP MAX
Response time
RL connected to 5 V through 5.1 kΩ,
§
100-mV input step with 5-mV overdrive 1.3
μs
CL = 15 pF, See Note 8 TTL-level input step 0.3
§ CL includes probe and jig capacitance.
NOTE 8: The response time specified is the interval between the input step function and the instant when the output crosses 1.4 V.
SLCS006L − OCTOBER 1979 − REVISED JUNE 2004
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 7
electrical characteristics at specified free-air temperature, VCC = 5 V (unless otherwise noted)
PARAMETER TEST TA‡
LM2901
CONDITIONS† UNIT
MIN TYP MAX
V = V (min),
Non-A devices
25°C 2 7
VIO Input offset voltage
VIC VICR(Full range 15
mV
IC ICR
VO = 1.4 V,
§
A-suffix devices
25°C 1 2
VCC = 5 V to MAXFull range 4
IIO Input offset current VO = 1.4 V
25°C 5 50
nA
Full range 200
IIB Input bias current VO = 1.4 V
25°C −25 −250
nA
Full range −500
VICR
Common-mode input-voltage
25°C
0 to
VCC−1.5
V
range
Full range
0 to
VCC−2
AVD
Large-signal differential-voltage
amplification
VCC = 15 V,
VO = 1.4 V to 11.4 V,
RL ≥ 15 kΩ to VCC
25°C 25 100 V/mV
IOH High-level output current VID = 1 V
VOH = 5 V 25°C 0.1 50 nA
VOH = VCC MAX§ Full range 1 μA
VID = −1 V,
Non-V devices
25°C
150 500
VOL Low-level output voltage
V-suffix devices
150 400 mV
IOL = 4 mA
All devices Full range 700
IOL Low-level output current VID = −1 V, VOL = 1.5 V 25°C 6 16 mA
ICC
Supply current
VO = 2.5 V,
VCC = 5 V
25°C
0.8 2
mA
(four comparators)
No load VCC = MAX§
1 2.5
† All characteristics are measured with zero common-mode input voltage, unless otherwise specified.
‡ Full range (MIN to MAX) for LM2901 is −40°C to 125°C. All characteristics are measured with zero common-mode input voltage, unless otherwise
specified.
§ VCC MAX = 30 V for non-V devices, and 32 V for V-suffix devices.
switching characteristics, VCC = 5 V, TA = 25°C
PARAMETER TEST CONDITIONS
LM2901
UNIT
MIN TYP MAX
Response time
RL connected to 5 V through 5.1 kΩ,

100-mV input step with 5-mV overdrive 1.3
μs
CL = 15 pF, See Note 8 TTL-level input step 0.3
¶ CL includes probe and jig capacitance.
NOTE 8: The response time specified is the interval between the input step function and the instant when the output crosses 1.4 V.
PACKAGING INFORMATION
Orderable Device Status (1) Package
Type
Package
Drawing
Pins Package
Qty
Eco Plan (2) Lead/Ball Finish MSL Peak Temp (3)
5962-7700801VCA ACTIVE CDIP J 14 1 None A42 SNPB Level-NC-NC-NC
5962-87739012A ACTIVE LCCC FK 20 1 None POST-PLATE Level-NC-NC-NC
5962-8773901CA ACTIVE CDIP J 14 1 None A42 SNPB Level-NC-NC-NC
5962-8773901DA ACTIVE CFP W 14 1 None A42 SNPB Level-NC-NC-NC
77008012A ACTIVE LCCC FK 20 1 None POST-PLATE Level-NC-NC-NC
7700801CA ACTIVE CDIP J 14 1 None A42 SNPB Level-NC-NC-NC
7700801DA ACTIVE CFP W 14 1 None A42 SNPB Level-NC-NC-NC
JM38510/11201BCA ACTIVE CDIP J 14 1 None A42 SNPB Level-NC-NC-NC
LM139AD ACTIVE SOIC D 14 50 None CU NIPDAU Level-3-245C-168 HR
LM139ADR ACTIVE SOIC D 14 2500 Pb-Free
(RoHS)
CU NIPDAU Level-2-250C-1 YEAR/
Level-1-235C-UNLIM
LM139AFKB ACTIVE LCCC FK 20 1 None POST-PLATE Level-NC-NC-NC
LM139AJ ACTIVE CDIP J 14 1 None A42 SNPB Level-NC-NC-NC
LM139AJB ACTIVE CDIP J 14 1 None A42 SNPB Level-NC-NC-NC
LM139AN OBSOLETE PDIP N 14 None Call TI Call TI
LM139AW ACTIVE CFP W 14 1 None A42 SNPB Level-NC-NC-NC
LM139AWB ACTIVE CFP W 14 1 None A42 SNPB Level-NC-NC-NC
LM139D ACTIVE SOIC D 14 50 None CU NIPDAU Level-1-220C-UNLIM
LM139DR ACTIVE SOIC D 14 2500 None CU NIPDAU Level-1-220C-UNLIM
LM139FKB ACTIVE LCCC FK 20 1 None POST-PLATE Level-NC-NC-NC
LM139J ACTIVE CDIP J 14 1 None A42 SNPB Level-NC-NC-NC
LM139JB ACTIVE CDIP J 14 1 None A42 SNPB Level-NC-NC-NC
LM139N OBSOLETE PDIP N 14 None Call TI Call TI
LM139W ACTIVE CFP W 14 1 None A42 SNPB Level-NC-NC-NC
LM139WB ACTIVE CFP W 14 1 None A42 SNPB Level-NC-NC-NC
LM239AD ACTIVE SOIC D 14 50 Pb-Free
(RoHS)
CU NIPDAU Level-2-260C-1 YEAR/
Level-1-235C-UNLIM
LM239ADR ACTIVE SOIC D 14 2500 Pb-Free
(RoHS)
CU NIPDAU Level-2-260C-1 YEAR/
Level-1-235C-UNLIM
LM239AN OBSOLETE PDIP N 14 None Call TI Call TI
LM239D ACTIVE SOIC D 14 50 Pb-Free
(RoHS)
CU NIPDAU Level-2-260C-1 YEAR/
Level-1-235C-UNLIM
LM239DR ACTIVE SOIC D 14 2500 Pb-Free
(RoHS)
CU NIPDAU Level-2-260C-1 YEAR/
Level-1-235C-UNLIM
LM239N ACTIVE PDIP N 14 25 Pb-Free
(RoHS)
CU NIPDAU Level-NC-NC-NC
LM239PW ACTIVE TSSOP PW 14 90 Pb-Free
(RoHS)
CU NIPDAU Level-1-250C-UNLIM
LM239PWR ACTIVE TSSOP PW 14 2000 Pb-Free
(RoHS)
CU NIPDAU Level-1-250C-UNLIM
LM2901AVQDR ACTIVE SOIC D 14 2500 Pb-Free
(RoHS)
CU NIPDAU Level-2-250C-1 YEAR/
Level-1-235C-UNLIM
LM2901AVQPWR ACTIVE TSSOP PW 14 2000 None CU NIPDAU Level-1-250C-UNLIM
LM2901D ACTIVE SOIC D 14 50 Pb-Free
(RoHS)
CU NIPDAU Level-2-260C-1 YEAR/
Level-1-235C-UNLIM
PACKAGE OPTION ADDENDUM
www.ti.com 18-Feb-2005
Addendum-Page 1
Orderable Device Status (1) Package
Type
Package
Drawing
Pins Package
Qty
Eco Plan (2) Lead/Ball Finish MSL Peak Temp (3)
LM2901DR ACTIVE SOIC D 14 2500 Pb-Free
(RoHS)
CU NIPDAU Level-2-260C-1 YEAR/
Level-1-235C-UNLIM
LM2901N ACTIVE PDIP N 14 25 Pb-Free
(RoHS)
CU NIPDAU Level-NC-NC-NC
LM2901NSR ACTIVE SO NS 14 2000 Pb-Free
(RoHS)
CU NIPDAU Level-2-260C-1 YEAR/
Level-1-235C-UNLIM
LM2901PW ACTIVE TSSOP PW 14 90 Pb-Free
(RoHS)
CU NIPDAU Level-1-250C-UNLIM
LM2901PWLE OBSOLETE TSSOP PW 14 None Call TI Call TI
LM2901PWR ACTIVE TSSOP PW 14 2000 Pb-Free
(RoHS)
CU NIPDAU Level-1-250C-UNLIM
LM2901QD OBSOLETE SOIC D 14 None Call TI Call TI
LM2901QN OBSOLETE PDIP N 14 None Call TI Call TI
LM2901VQDR ACTIVE SOIC D 14 2500 Pb-Free
(RoHS)
CU NIPDAU Level-2-250C-1 YEAR/
Level-1-235C-UNLIM
LM2901VQPWR ACTIVE TSSOP PW 14 2000 None CU NIPDAU Level-1-250C-UNLIM
LM339AD ACTIVE SOIC D 14 50 Pb-Free
(RoHS)
CU NIPDAU Level-2-260C-1 YEAR/
Level-1-235C-UNLIM
LM339ADBR ACTIVE SSOP DB 14 2000 Pb-Free
(RoHS)
CU NIPDAU Level-2-260C-1 YEAR/
Level-1-235C-UNLIM
LM339ADR ACTIVE SOIC D 14 2500 Pb-Free
(RoHS)
CU NIPDAU Level-2-260C-1 YEAR/
Level-1-235C-UNLIM
LM339AN ACTIVE PDIP N 14 25 Pb-Free
(RoHS)
CU NIPDAU Level-NC-NC-NC
LM339ANSR ACTIVE SO NS 14 2000 Pb-Free
(RoHS)
CU NIPDAU Level-2-260C-1 YEAR/
Level-1-235C-UNLIM
LM339APW ACTIVE TSSOP PW 14 90 Pb-Free
(RoHS)
CU NIPDAU Level-1-250C-UNLIM
LM339APWR ACTIVE TSSOP PW 14 2000 Pb-Free
(RoHS)
CU NIPDAU Level-1-250C-UNLIM
LM339D ACTIVE SOIC D 14 50 Pb-Free
(RoHS)
CU NIPDAU Level-2-260C-1 YEAR/
Level-1-235C-UNLIM
LM339DBLE OBSOLETE SSOP DB 14 None Call TI Call TI
LM339DBR ACTIVE SSOP DB 14 2000 Pb-Free
(RoHS)
CU NIPDAU Level-2-260C-1 YEAR/
Level-1-235C-UNLIM
LM339DR ACTIVE SOIC D 14 2500 Pb-Free
(RoHS)
CU NIPDAU Level-2-260C-1 YEAR/
Level-1-235C-UNLIM
LM339N ACTIVE PDIP N 14 25 Pb-Free
(RoHS)
CU NIPDAU Level-NC-NC-NC
LM339NSLE OBSOLETE SO NS 14 None Call TI Call TI
LM339NSR ACTIVE SO NS 14 2000 Pb-Free
(RoHS)
CU NIPDAU Level-2-260C-1 YEAR/
Level-1-235C-UNLIM
LM339PW ACTIVE TSSOP PW 14 90 Pb-Free
(RoHS)
CU NIPDAU Level-1-250C-UNLIM
LM339PWLE OBSOLETE TSSOP PW 14 None Call TI Call TI
LM339PWR ACTIVE TSSOP PW 14 2000 Pb-Free
(RoHS)
CU NIPDAU Level-1-250C-UNLIM
LM339Y OBSOLETE 0 None Call TI Call TI
(1) The marketing status values are defined as follows:
PACKAGE OPTION ADDENDUM
www.ti.com 18-Feb-2005
Addendum-Page 2
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in
a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2) Eco Plan - May not be currently available - please check http://www.ti.com/productcontent for the latest availability information and additional
product content details.
None: Not yet available Lead (Pb-Free).
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements
for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered
at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Green (RoHS & no Sb/Br): TI defines "Green" to mean "Pb-Free" and in addition, uses package materials that do not contain halogens,
including bromine (Br) or antimony (Sb) above 0.1% of total product weight.
(3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDECindustry standard classifications, and peak solder
temperature.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is
provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the
accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take
reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on
incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited
information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI
to Customer on an annual basis.
PACKAGE OPTION ADDENDUM
www.ti.com 18-Feb-2005
Addendum-Page 3

MECHANICAL DATA
MCFP002A – JANUARY 1995 – REVISED FEBRUARY 2002
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
W (R-GDFP-F14) CERAMIC DUAL FLATPACK
Base and Seating Plane
NOTES: A. All linear dimensions are in inches (millimeters).
B. This drawing is subject to change without notice.
C. This package can be hermetically sealed with a ceramic lid using glass frit.
D. Index point is provided on cap for terminal identification only.
E. Falls within MIL STD 1835 GDFP1-F14 and JEDEC MO-092AB
MECHANICAL DATA
MLCC006B – OCTOBER 1996
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
FK (S-CQCC-N**) LEADLESS CERAMIC CHIP CARRIER
4040140/D 10/96
28 TERMINAL SHOWN
NOTES: A. All linear dimensions are in inches (millimeters).
B. This drawing is subject to change without notice.
C. This package can be hermetically sealed with a metal lid.
D. The terminals are gold plated.
E. Falls within JEDEC MS-004
MECHANICAL DATA
MSSO002E – JANUARY 1995 – REVISED DECEMBER 2001
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
DB (R-PDSO-G**) PLASTIC SMALL-OUTLINE
4040065 /E 12/01
28 PINS SHOWN
NOTES: A. All linear dimensions are in millimeters.
B. This drawing is subject to change without notice.
C. Body dimensions do not include mold flash or protrusion not to exceed 0,15.
D. Falls within JEDEC MO-150
MECHANICAL DATA
MTSS001C – JANUARY 1995 – REVISED FEBRUARY 1999
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
PW (R-PDSO-G**) PLASTIC SMALL-OUTLINE PACKAGE
NOTES: A. All linear dimensions are in millimeters.
B. This drawing is subject to change without notice.
C. Body dimensions do not include mold flash or protrusion not to exceed 0,15.
D. Falls within JEDEC MO-153
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications,
enhancements, improvements, and other changes to its products and services at any time and to discontinue
any product or service without notice. Customers should obtain the latest relevant information before placing
orders and should verify that such information is current and complete. All products are sold subject to TI’s terms
and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in
accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TI
deems necessary to support this warranty. Except where mandated by government requirements, testing of all
parameters of each product is not necessarily performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for
their products and applications using TI components. To minimize the risks associated with customer products
and applications, customers should provide adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right,
copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process
in which TI products or services are used. Information published by TI regarding third-party products or services
does not constitute a license from TI to use such products or services or a warranty or endorsement thereof.
Use of such information may require a license from a third party under the patents or other intellectual property
of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of information in TI data books or data sheets is permissible only if reproduction is without
alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction
of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for
such altered documentation.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that
product or service voids all express and any implied warranties for the associated TI product or service and
is an unfair and deceptive business practice. TI is not responsible or liable for any such statements.
Following are URLs where you can obtain information on other Texas Instruments products and application
solutions:
Products Applications
Amplifiers amplifier.ti.com Audio www.ti.com/audio
Data Converters dataconverter.ti.com Automotive www.ti.com/automotive
DSP dsp.ti.com Broadband www.ti.com/broadband
Interface interface.ti.com Digital Control www.ti.com/digitalcontrol
Logic logic.ti.com Military www.ti.com/military
Power Mgmt power.ti.com Optical Networking www.ti.com/opticalnetwork
Microcontrollers microcontroller.ti.com Security www.ti.com/security
Telephony www.ti.com/telephony
Video & Imaging www.ti.com/video
Wireless www.ti.com/wireless
Mailing Address: Texas Instruments
Post Office Box 655303 Dallas, Texas 75265
Copyright  2005, Texas Instruments IncorporatedLM339N is the number for products that is related with integrated circuit.